Inside a Digital Camera

In a nutshell, a digital camera uses a lens or series of lenses to focuses light onto a sensor. This sensor then records the image electronically and transfers it to the electronic workings of the camera where it is organized, converted into binary digital data, and then stored on fixed or removable memory to be later read by a computer. Of course this is a highly simplified explanation of how a digital camera works.

The most common digital camera sensor is a charge-coupled device, or CCD, but some models use a complementary metal oxide semiconductor (CMOS). In either case, light beams are converted to electrical charges, which are then transferred to the core electronic section, and eventually onto the storage media.

During the conversion, the light is filtered into the three primary colors, which are combinable to create a full spectrum light. Better quality digital cameras use three separate sensors to do this. Each sensor contains a filter of a different color, allowing it to read just the light that matches.

The amount of light reaching the sensor is also controlled carefully. Cameras do this in two ways: aperture size, and shutter speed. Most of today's cameras have automated aperture settings, although some models allow manual control, which enthusiasts and professionals prefer. Shutter speed is generally set electronically.

There are four kinds of lenses used by digital cameras: optical-zoom lenses with automatic focus; fixed-focus, fixed-zoom lenses; digital-zoom lenses; and replaceable lens systems. Optical zoom lenses have both telephoto and wide options, while the fixed focus and fixed zoom lenses are used in the ordinary, inexpensive cameras that infrequent users own. The digital zoom lens creates the illusion of a zoom effect by culling pixels from the central part of the image and enlarging them to fill the frame. This, however, often results in a grainy or fuzzy image at the extreme limits of the camera's capabilities.

An LCD screen is included on most digital cameras to view the image. These screens are usually rather small, being constrained to the size of the camera. Thus the image needs to be transferred to a computer for better viewing or printing. The overall quality of the image depends primarily upon the resolution of a digital camera. The higher the resolution, measured in megapixels, the better the image quality.

The potential size of the printed photographs is also decided by the camera's resolution. Because their resolution is relatively low, a 1-megapixel digital camera will produce images that are good for e-mailing or posting on the Web, and little else. The images taken by a 2-megapixel camera are suitable for 4x5 inch prints while good-looking 16x20 inch prints can be produced by a 4-megapixel camera. Better to get a 6 megapixel or higher model if you love working with photos.

Early digital cameras stored images on memory resources built into the camera. Images were then transferred to computers with the help of cables. Most modern digital camera makers utilize reusable and removable storage devices. These devices include SmartMedia cards, CompactFlash cards and other memory sticks. Other, less common removable storage devices include hard disks or microdrives, and writeable CDs or DVDs. These options have considerably enhanced the volume of visual data that can be stored as well as the overall flexibility of the modern digital camera.

Wilfred Ursley writes for a variety of respected Internet sites, with tips and resources on consumer products and family health topics.
Feel free to grab a unique version of this article from the Uber digital cameras article directory

Article Source: http://www.wellnessarticlelibrary.com

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated